If you pop the mirror from the bottom with a screwdriver you won't break clips.
The administrator has disabled public write access.
Re:xenon and led replacement
Date: 2008/01/31 16:40
By: camerax
Status: User
Karma: -6
F.J.C.O. Pro
Posts: 56
Thanks for the tip!
Camerax
The administrator has disabled public write access.
Re:xenon and led replacement
Date: 2008/02/08 13:02
By: broncotrevor4x4
Status: User
Karma: 1
F.J.C.O. Pro
Posts: 57
camerax wrote: That's cool. How easily were the passenger & driver's side mirrors to remove? I don't like the idea of them breaking when I pry them. Are the clips obtainable from Toyota?
Thanks
CameraX
you WILL break at least one on each side...the top clips are much different from the bottom (there are four two up two down) the bottoms are stronger...there all i have left and their work just fine...you just have to suck it up and do it just know in the back of your mind that the top clips are shiz and will inevitably break.
-Trevor
The administrator has disabled public write access.
Re:xenon and led replacement
Date: 2008/02/08 13:03
By: broncotrevor4x4
Status: User
Karma: 1
F.J.C.O. Pro
Posts: 57
Runner_Ryan wrote: Nicely done! It's nice to see you are actually USING your truck. Now it's time to upgrade the front bumper.
bumper got here yesterday from all pro...were running the same thing..any install hints you want to shed upon me?
they shipped me a superwinch instead of a tmax...i sent it back the tmax should be here today
The administrator has disabled public write access.
Re:xenon and led replacement
Date: 2008/02/09 04:59
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
I found that I couldn't adjust the bumper down far enough. It rubs on the underside of the grille and the two body pieces on each side. I'm just gonna oval the mounting holes, so I can adjust it down a bit more.
The administrator has disabled public write access.
