The administrator has disabled public write access.
Re:question about bumper
Date: 2007/08/07 02:24
By: Lemony
Status: User
Karma: 1
F.J.C.O. Rookie
Posts: 10
took mine off the first week and painted them black with duplicolor truck bed paint, looks way better. the silver plastic dodad add on engineer at toyota should be fired.
The administrator has disabled public write access.
Re:question about bumper
Date: 2007/08/12 07:01
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
Memphis FJ wrote: 37's fit with just a three inch lift? Ya, pretty much. I had to trim the body mount, along with some other stuff, and they still rubbed a little bit in extreme flex. There are other pics on this site and others with them on my black Cruiser. I ended up selling them for more than I paid.
The administrator has disabled public write access.
Re:question about bumper
Date: 2007/09/04 00:01
By: ERPP
Status: User
Karma: 0
F.J.C.O. Rookie
Posts: 12
i have a question for you bro!!! i have i FJ cruiser and i would buy the 6inch procomp suspension.... can i use 37'?
Runner_Ryan wrote: Memphis FJ wrote: 37's fit with just a three inch lift? Ya, pretty much. I had to trim the body mount, along with some other stuff, and they still rubbed a little bit in extreme flex. There are other pics on this site and others with them on my black Cruiser. I ended up selling them for more than I paid.
The administrator has disabled public write access.
Re:question about bumper
Date: 2007/09/05 00:37
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
I would imagine if you had the correct wheel offset, and trimmed the body mount, 37's should fit with the 6" lift. Keep in mind that some of the 6" kits require 18" rims or larger, and you have to cut one of the frame crossmembers. Pretty sure that would void the warrentee.
Oh, and there was slight rubbage on the frame when steering very sharp. The extra height of the 6" lift might help this, though.
Post edited by: Runner_Ryan, at: 2007/09/05 00:39
The administrator has disabled public write access.
