I just called my dealership and asked for one of those square black switches that fit in the FJ. He said he had them in stock for $17. I haven't figured out how to get it from the engine compartment to the passenger compartment yet.
Anyone have any ideas?
Teejeaux
The administrator has disabled public write access.
Re:PIAA Lights Install Questions
Date: 2006/08/30 02:11
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
I also would like a part # for the oem switch for $17 bux. Is it the Tacoma fog light switch?
The administrator has disabled public write access.
Re:PIAA Lights Install Questions
Date: 2006/08/30 06:20
By: Teejeaux
Status: User
Karma: 1
F.J.C.O. Regular
Posts: 39
I think it might be, the guy was telling me that the part was the same one as in the Tacoma. When I pick it up, I'll post about it. I'm still trying to figure out WTF is wrong with my ARB lights, and how the HELL go get the switch on my PIAA lights into the cab..
The administrator has disabled public write access.
Re:PIAA Lights Install Questions
Date: 2006/08/30 14:42
By: colink
Status: User
Karma: 0
F.J.C.O. n00b
Posts: 1
"Toyota Tacoma Fog Light Switch (84160-04010) Optional: Toyota Connector Housing (90980-11090) Termainal Wires for Connector (82998-12340 4 required)"
You can either route wires through existing rubber grommets in the firewall on the driver's side above the brake pedal or on the passenger side (not sure where it enters the cab).
The administrator has disabled public write access.
Re:PIAA Lights Install Questions
Date: 2006/08/31 05:47
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
The rubber gromet on the passenger side is huge. Can't miss it. It has a little nipple you can cut off. Run wires through that.
The administrator has disabled public write access.
