spacer.png, 0 kB
Advertisement

FJ Cruiser Owners.com Forum

<< Start < Prev 1 2 3 4 Next > End >>
Click here to see the profile of this user
Re:Leveling my FJ
Date: 2008/01/13 18:25 By: Runner_Ryan Status: Admin  
Karma: 30  
Admin

Posts: 1426
graph
I think OME advertises 2.5" of lift. I ended up getting close to 4" from my OME heavy kit. Part of the extra is because I didn't put a super heavy bumper on, and I don't have a winch. It rides a lot better when loaded down. The OME mediums would be pretty good for a daily driver.
Click here to see the profile of this user The administrator has disabled public write access.

Click here to see the profile of this user
Re:Leveling my FJ
Date: 2008/01/14 13:44 By: dzolo Status: User  
Karma: 1  
F.J.C.O. n00b

Posts: 9
graphgraph
Thanks!
Click here to see the profile of this user The administrator has disabled public write access.

Re:Leveling my FJ
Date: 2008/01/15 01:47 By: broncotrevor4x4 Status: User  
Karma: 1  
F.J.C.O. Pro

Posts: 57
graphgraph
its a 2" kit...but you can slap some 33's on the fj stock just cause its soo bad...and you might want to do a tad trimming...but youll live
Click here to see the profile of this user The administrator has disabled public write access.

Click here to see the profile of this user
Re:Leveling my FJ
Date: 2008/01/15 04:42 By: NSBCruiser Status: User  
Karma: 0  
F.J.C.O. n00b

Posts: 4
graphgraph
I just installed OME Heavy Duty and it leveled it nicely, the front is up 4" and the back is 3 1/4", with a new bumper it should equal out. I had to adjust my headlights, it was easy with long philips. OME HD kit drives like factory.
Click here to see the profile of this user The administrator has disabled public write access.

Click here to see the profile of this user
Re:Leveling my FJ
Date: 2008/01/16 02:53 By: Runner_Ryan Status: Admin  
Karma: 30  
Admin

Posts: 1426
graph
NSBCruiser wrote:
OME HD kit drives like factory.
I'm going to have to disagree with you here.
My OME heavy rides very stiff. Especially if I don't have any gear in the truck.
Did you get the 886/896 springs?
Click here to see the profile of this user The administrator has disabled public write access.

<< Start < Prev 1 2 3 4 Next > End >>

spacer.png, 0 kB
spacer.png, 0 kB