quick question...does the ome kit (i was looking at medium) f-up the camber or caster( not sure of the right word) but does it make the tires crooked...how would you fix that....and what about voiding warrentys? i plan on putting the arb bull bar with a tmax 9k winch and i know its gunna look low in the front
thanks
The administrator has disabled public write access.
Re:Leveling my FJ
Date: 2008/01/17 02:29
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
You will want to have your wheels aligned after any lift is installed. That said, I haven't done mine, and it's been a while.
The administrator has disabled public write access.
Re:Leveling my FJ
Date: 2008/01/17 23:42
By: broncotrevor4x4
Status: User
Karma: 1
F.J.C.O. Pro
Posts: 57
haha fair enough... in your all pro bumper do you have a winch if so what?
i have heard that warn and tmax have the same bolt pattern is that true?
The administrator has disabled public write access.
Re:Leveling my FJ
Date: 2008/01/18 02:16
By: NSBCruiser
Status: User
Karma: 0
F.J.C.O. n00b
Posts: 4
I took all the gear out (I had a lot) and your right it does ride stiffer. I put on the 886 springs in the front and 895 in the rear.
The administrator has disabled public write access.
Re:Leveling my FJ
Date: 2008/01/19 05:08
By: Runner_Ryan
Status: Admin
Karma: 30
Admin
Posts: 1426
I have 886/896. No winch in bumper. I think once I have my rear bumper installed, and full skids, it should be a bit better.
The administrator has disabled public write access.
